Microsoft DOS cmd and command

Quick links

About command
Availability
Syntax
Examples

About command

The command.com is the command interpreter for MS-DOS and is required for the majority of Microsoft's operating systems. Without command.com the computer running a Microsoft operating system would be unable to boot.

When running Windows NT, 2000, XP, or future operating systems there are two versions of the command interpreter, command.com and cmd.exe. Cmd offers additional environment variables than command.com; however, it is recommend if you are attempting to run a MS-DOS utility that you utilize the command.com. To use command.com, click Start, Run, and type command.

• Information about creating a bootable diskette, which also requires command.com, can be found on our boot diskette page.
• Additional information about shells can be found on our shell dictionary definition.

Availability

Command, or command.com, is the command interpreter, and with early versions of Windows and MS-DOS, you would not be able to use the computer without this file. This file is available on all versions of Microsoft Windows and later versions of Windows use it to access the MS-DOS shell.

All Versions of MS-DOS
Windows 95
Windows 98
Windows ME
Windows NT
Windows 2000
Windows XP

CMD, or CMD.EXE, is the command line shell introduced in Windows NT and available in all the below versions of Microsoft Windows.

Windows NT
Windows 2000
Windows XP
Windows Vista
Windows 7

Syntax

Command syntax

Starts a new copy of the Windows Command Interpreter.

COMMAND [[drive:] path] [device] [/E:nnnnn] [/L:nnnn] [/U:nnn] [/P] [/MSG] [/LOW] [/Y [/C|K] command]

CMD syntax

Starts a new instance of the Windows 2000 or Windows XP command interpreter.

CMD [/A | /U] [/Q] [/D] [/E:ON | /E:OFF] [/F:ON | /F:OFF] [/V:ON | /V:OFF] [[/S] [/C | /K] string]

Note that multiple commands separated by the command separator '&&' are accepted for string if surrounded by quotes. Also, for compatibility reasons, /X is the same as /E:ON, /Y is the same as /E:OFF and /R is the same as /C. Any other switches are ignored.

If /C or /K is specified, then the remainder of the command line after the switch is processed as a command line, where the following logic is used to process quote (") characters:

1. If all of the following conditions are met, then quote characters on the command line are preserved:

- no /S switch
- exactly two quote characters
- no special characters between the two quote characters, where special is one of: &<>()@^|
- there are one or more whitespace characters between the two quote characters
- the string between the two quote characters is the name of an executable file.

2. Otherwise, old behavior is to see if the first character is a quote character and if so, strip the leading character and remove the last quote character on the command line, preserving any text after the last quote character.

If /D was NOT specified on the command line, then when CMD.EXE starts, it looks for the following REG_SZ/REG_EXPAND_SZ registry variables, and if either or both are present, they are executed first.

HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\AutoRun

or

HKEY_CURRENT_USER\Software\Microsoft\Command Processor\AutoRun

Command Extensions are enabled by default. You may also disable extensions for a particular invocation by using the /E:OFF switch. You can enable or disable extensions for all invocations of CMD.EXE on a machine or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE:

HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\EnableExtensions

or

HKEY_CURRENT_USER\Software\Microsoft\Command Processor\EnableExtensions

to either 0x1 or 0x0. The user specific setting takes precedence over the machine setting. The command line switches take precedence over the registry settings.

The command extensions involve changes or additions to the below commands.

DEL or ERASE
COLOR
CD or CHDIR
MD or MKDIR
PROMPT
PUSHD
POPD
SET
SETLOCAL
ENDLOCAL
IF
FOR
CALL
SHIFT
GOTO
START (also includes changes to external command invocation)
ASSOC
FTYPE

To get specific details, type commandname /? to view the specifics.

Delayed environment variable expansion is NOT enabled by default. You can enable or disable delayed environment variable expansion for a particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You can enable or disable completion for all invocations of CMD.EXE on a machine or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE:

HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion

or

HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion

to either 0x1 or 0x0. The user specific setting takes precedence over the machine setting. The command line switches take precedence over the registry settings.

If delayed environment variable expansion is enabled, then the exclamation character can be used to substitute the value of an environment variable at execution time.

File and Directory name completion is NOT enabled by default. You can enable or disable file name completion for a particular invocation of CMD.EXE with the /F:ON or /F:OFF switch. You can enable or disable completion for all invocations of CMD.EXE on a machine or user logon session by setting either or both of the following REG_DWORD values in the registry using REGEDT32.EXE:

HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\CompletionChar
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\PathCompletionChar

or

HKEY_CURRENT_USER\Software\Microsoft\Command Processor\CompletionChar
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\PathCompletionChar

with the hex value of a control character to use for a particular function (e.g. 0x4 is Ctrl-D and 0x6 is Ctrl-F). The user specific settings take precedence over the machine settings. The command line switches take precedence over the registry settings.

If completion is enabled with the /F:ON switch, the two control characters used are Ctrl-D for directory name completion and Ctrl-F for file name completion. To disable a particular completion character in the registry, use the value for space (0x20) as it is not a valid control character.

Completion is invoked when you type either of the two control characters. The completion function takes the path string to the left of the cursor appends a wild card character to it if none is already present and builds up a list of paths that match. It then displays the first matching path. If no paths match, it just beeps and leaves the display alone. Thereafter, repeated pressing of the same control character will cycle through the list of matching paths. Pressing the Shift key with the control character will move through the list backwards. If you edit the line in any way and press the control character again, the saved list of matching paths is discarded and a new one generated. The same occurs if you switch between file and directory name completion. The only difference between the two control characters is the file completion character matches both file and directory names, while the directory completion character only matches directory names. If file completion is used on any of the built in directory commands (CD, MD or RD) then directory completion is assumed.

The completion code deals correctly with file names that contain spaces or other special characters by placing quotes around the matching path. Also, if you backup, then invoke completion from within a line, the text to the right of the cursor at the point completion was invoked is discarded.

Examples

cmd

Opens the cmd command shell.